MR-A2600 DC12V Semi-open, Semi-closed Hospital Anesthesia Machine with Ventilator

MR-A2600 DC12V Semi-open, Semi-closed Hospital Anesthesia Machine with Ventilator

Special Feature

1. Patient type: Adult, Pediatric

2. Driven mode: Pneumatically driven electronically controlled

3. Mode: Semi-open, Semi-closed or Closed system

4. Aesthetic vaporizer: one vaporizer

5. Power supply:220v±10%, 50Hz±1Hz

110v±10%, 60Hz±1Hz

6. Power consumption:≤50W

7. Internal battery: DC12V (over 4 working hours)

Anesthesia ventilator

1. Respiration mode: IPPV, SIMV, SIGH, MANUAL

2. Display: 5.5’ SNT screen

3. Waveform: P-t, V-t

4. Tidal volume: 50ml~1600ml

5. Respiratory frequency: 1~65BPM

6. I:E ratio: 8:1~1:8

7. Alarm parameters: High pressure alarm, Low pressure alarm, O2 source failure alarm

8. Pressure alarm setting:

  High pressure alarm limit: 20~60cmH2O

  Low pressure alarm limit: 0~20cmH2O

9. Monitor parameters: Tidal volume, MV, Ppeak, PEEP, respiratory frequency, I:E ratio

10. Safety valve pressure limit: 6 Kpa

11. Good air tightness, high reliability, and minor respiration impedance

Main unit

1. Circle absorber: compact circle absorber

2. Bellow: 0~1600ml

3. Flow meter:

O2, N2O four-tube flow meter

O2 tube: 0L/min~1L/min~10L/min

N2O tube: 0L/min~1L/min~10L/min

O2 and N2O Linkage Device Adjust O2 and N2O in proportion(keep O2 concentration not lower than 25%)

4. Oxygen FLUSH: 25L/min~75L/min

5. Gas source pressure:

O2: 0.25Mpa~0.65Mpa

N2O: 0.25Mpa~0.65Mpa

6. Gauge: Two gauges, N2O, O2